LOCTITE ABLESTIK JM 7000 die attach adhesive has been
formulated for use in high throughput die attach applications. This
material has been used successfully on rigid substrates with die sizes
up to 700 mils.
LOCTITE ABLESTIK JM 7000 has been approved by DESC and
Rome Laboratory for military products.
TYPICAL PROPERTIES OF UNCURED MATERIAL
Viscosity, HAAKE RV-20 Rotoviscometer, mPa·s (cP):
Cone 1o @ Shear rate 22 s
-1 9,000
Work Life @ 25°C, hours 8 to 16
Shelf Life @ -40°C (from date of manufacture), days 365
TYPICAL CURING PERFORMANCE
Cure Schedule
30 minutes @ 150°C
Suggested temperature cures are from 150 to 350oC. For
applications requiring higher electrical conductivity, a cure cycle of 15
minutes @ 300oC is recommended. Product properties will not be
reduced by subsequent post die attach thermal exposure, i.e.,
wirebond, and/or lid seal up to 370oC.
TYPICAL PERFORMANCE OF CURED MATERIAL
Die Shear Strength:
2 X 2 mm Si die, kg-f,
cured 20 minutes @ 150oC
Substrate DSS
Ag/Cu LF ≥5
Tensile Strength :
cured 30 minutes @ 300oC, MPa
After Cure After 1000 TC'C"
>17 >17
Radius of Curvature:
Si die on Alumina, meters
cured 30 minutes @ 300oC
Chip Size: ROC
15 x 15 mm > 5
漢高樂泰導電膠,楊浦厚膜漢高ABLESTIKJM7000導電膠
面議
產品名：漢高ABLESTIKJM7000導電膠,JM7000導電膠,漢高導電膠,樂泰導電膠
ablestik84-1A導電膠
面議
產品名：導電膠,耐高溫導電膠,84-1A導電膠,84-1LMI導電膠
玉樹樂泰545螺紋膠密封膠
面議
產品名：樂泰545螺紋膠,密封膠
甘南樂泰454瞬干膠快干膠
面議
產品名：樂泰454 瞬干膠,快干膠
虹口樂泰SI5910密封膠硅基密封膠
面議
產品名：樂泰SI 5910 密封膠,硅基密封膠
通遼樂泰M18養護劑
面議
產品名：樂泰M18養護劑,金屬養護劑
福建樂泰515密封膠平面密封膠
面議
產品名：樂泰515 密封膠,平面密封膠
阜新樂泰510密封膠平面密封膠
面議
產品名：樂泰 510 密封膠,平面密封膠