LOCTITE ABLESTIK JM 7000 die attach adhesive has been
formulated for use in high throughput die attach applications. This
material has been used successfully on rigid substrates with die sizes
up to 700 mils.
LOCTITE ABLESTIK JM 7000 has been approved by DESC and
Rome Laboratory for military products.
TYPICAL PROPERTIES OF UNCURED MATERIAL
Viscosity, HAAKE RV-20 Rotoviscometer, mPa·s (cP):
Cone 1o @ Shear rate 22 s
-1 9,000
Work Life @ 25°C, hours 8 to 16
Shelf Life @ -40°C (from date of manufacture), days 365
TYPICAL CURING PERFORMANCE
Cure Schedule
30 minutes @ 150°C
Suggested temperature cures are from 150 to 350oC. For
applications requiring higher electrical conductivity, a cure cycle of 15
minutes @ 300oC is recommended. Product properties will not be
reduced by subsequent post die attach thermal exposure, i.e.,
wirebond, and/or lid seal up to 370oC.
TYPICAL PERFORMANCE OF CURED MATERIAL
Die Shear Strength:
2 X 2 mm Si die, kg-f,
cured 20 minutes @ 150oC
Substrate DSS
Ag/Cu LF ≥5
Tensile Strength :
cured 30 minutes @ 300oC, MPa
After Cure After 1000 TC'C"
>17 >17
Radius of Curvature:
Si die on Alumina, meters
cured 30 minutes @ 300oC
Chip Size: ROC
15 x 15 mm > 5
漢高樂泰導電膠,楊浦厚膜漢高ABLESTIKJM7000導電膠
面議
產品名：漢高ABLESTIKJM7000導電膠,JM7000導電膠,漢高導電膠,樂泰導電膠
ablestik84-1A導電膠
面議
產品名：導電膠,耐高溫導電膠,84-1A導電膠,84-1LMI導電膠
平涼樂泰648固持膠固化劑
面議
產品名：樂泰648固持膠,固化劑
臺東縣樂泰EA-E20HP樹脂膠樂泰EA-E20HP樹脂膠
面議
產品名：樂泰EA-E20HP 樹脂膠,樂泰EA-E20HP樹脂膠
新鄉樂泰EA3463環氧修補劑環氧修補劑
面議
產品名：樂泰EA 3463環氧修補劑,環氧修補劑
天水樂泰環氧灌封膠FP4531
面議
產品名：樂泰環氧灌封膠,FP4531,底部填充劑
酉陽樂泰542螺紋膠
面議
產品名：樂泰542 螺紋膠,螺紋密封膠
黑河樂泰SF7070清洗劑
面議
產品名：樂泰 SF 7070 清洗劑,噴罐清洗劑