中山市塑料八大重金屬ROHS檢測儀器
1.6.5 八大重金屬:鉛(Pb)、汞(Hg)、鎘(Cd)、鉻(Cr)、砷(AS).,銻(Sb).硒(Se)鋇(Ba)
1.6.6. 多次測量重復性可達0.1%(總熒光強度)(當樣品含量大于96%);
The measurement repeatability on many occasions can reach 0.1% of total intensity of fluorescence when the content of samples is greater than 96%.
1.6.7. 長期工作穩(wěn)定性為0.1%;(總熒光強度)
Long-term working stability being 0.1% (total intensity of fluorescence)
2.1.1. 電制冷半導體探測器;分辨率:135±5電子伏特 Electro-refrigeration semiconductor detector; Resolution: 135±5eV
2.1.2. 對樣品特征X射線進行探測;把探測采集的信息進一步放大。對樣品的檢出限、測試精度大大提高。Detecting characteristic X rays of the samples, and amplifying the information from the detection. The detection limit is reduced and detection accuracy is increased greatly.
2.2 X 光管 X-Ray Tube
技術指標及功能: Technical Specifications and Features:
2.2.1. 使用壽命大于2萬小時 Service life is longer than 20,000 hours.
2.2.2. 產生X射線激發(fā)樣品 Emitting X rays to excite the samples
1.6.8. 能量分辨率為135±5電子伏特 Energy resolution: 135±5eV
1.6.9. 溫度適應范圍為15℃至30℃ Suitable temperature range is from 15℃ to 30℃
1.6.10. 電源:交流220±5V;(建議配置交流凈化穩(wěn)壓電源。)
Power supply: AC 220±5V. The purified AC regulated power supply is recommended.)
1.6.11.相互立的基體效應校正模型 Independent matrix effect correction model
1.6.12.多變量非線性回歸程序 Multi-variable non-linear regression procedure
1.6.13.任意多個可選擇的分析和識別模型 Arbitrary optional analysis and identification models
1.6.14.一次可同時分析24個元素 Ability to analyze 24 elements simultaneously
1.6.15儀器誤差:在測試含量在100ppm內的時候誤差會在正負10ppm以內,含量在100-1000ppm以上時誤差會在正負10%以內,,含量在1000ppm以上時誤差會在正負15%以內
2. 儀器硬件部分主要配置 Main Hardware Configuration of EDX 1800B
2.1 硅針半導體探測器+放大電路:(新型的探測器)
Silicon Pin Semiconductor Detector + Amplifier Circuit (streamlined detector)
技術指標及功能: Technical Specifications and Features:
2.3 高、低壓電源 High/Low Voltage Power Supply
技術指標及功能: Technical Specifications and Features:
2.3.1. 從 5~50kV,1毫安 5~50kV, 1mA
2.3.2. 為X光提供電源 Providing power supply exclusively to X-ray
2.4 MCA多道分析器: Multi-Channel Analyzer
技術指標及功能: Technical Specifications and Features:
2.4.1.對采集來的信號進行數據處理,并將處理結果傳輸給計算機
Data processing with the collected signals, and transferring the results to the computer
2.5 高精密攝像頭130萬(CCD) High Resolution CCD Camera
試樣觀察 Observing samples
2.6 移動平臺 Movable Platform
樣品微調移動平臺,樣品測試位置準確性。
The movable platform finely adjusts the samples, ensuring the accurate location of sample testing.
2.7 超大樣品腔 Super Large Sample Chamber
樣品腔尺寸(450mm×280mm×180mm) Size of the sample chamber: 450mm×280mm×180mm
2.8 準直器自動切換 Automatic Switch Between Collimators
光斑直徑為0.1,0.5,1,2,3,4,6,8mm的準直器的自動切換。
The collimators with facular diameters of 0.1, 0.5, 1, 2, 3, 4, 6, 8mm switch automatically.
2.9 濾光片自動切換 Automatic Switch Between Filters
五種濾光片的自由選擇和切換。
Customers can choose freely from the five filters, and they switch automatically.
2.10 準直器和濾光片的自由組合 Free Combinations Between Collimators and Filters
多達幾十種的準直器和濾光片的自由組合。
There are tens of combinations between the collimators and the filters.
3. 儀器外圍設備配置 Peripherals of EDX 1800B
3.1 計算機 Computer
3.1.1 作用:用于協助X-Ray分析儀進行數據處理
Function: Helps the X-ray analyzer with data processing
3.1.2 配置: 操作系統(tǒng) Configuration: OS – Windows 2000/XP
3.1.3 內存 Memory: 2G
3.1.4 顯示器 Monitor: 19.7” SVGA LCD
3.1.5 硬盤 HD: 500G or more
3.1.6 光驅 DVD-ROM: 24X or more
3.1.7 CPU: P4 2.8
3.2彩色噴墨打印機 Color Ink-Jet Printer
3.2.1作用:用于將所分析結果從電腦輸出。Function: To print out the analysis results from the computer.
4. 儀器軟件配置: Software of EDX 1800B
軟件功能:Functions of the software:
2 軟件可視頻觀察樣品的放置 We can observe the samples with the camera.
2 同時可分析幾十種元素,分析時間短到1-3分鐘
Simultaneous analysis for tens of elements within 1 to 3 minutes
2 可自動進行定性分析,報告準確。 Automatic qualitative analysis and accurate report
2 可自動對儀器初始化校準 Automatic initialization and calibration
2 具有多種光譜擬合分析方法 A variety of fitting analysis methods for spectra
4.1 RoSH分析軟件 RoHS Analysis Software
4.1.1功能介紹: 檢測歐盟RoHS指令中六種物質涉及的五種元素 Cd, Pb, Hg, Br, Cr,Cl
Introduction to functions: It’s used for inspecting five hazardous elements Cd, Pb, Hg, Br ,Cland Cr contained in the six substances in the EU RoHS directive.
2 針對RoHS檢測,進行的化設計的軟件,更具有針對性。
This professional software is designed for the RoHS testing with a higher degree of pertinence.
2 操作界面簡潔,使用方便,無需人士操作
With a concise and easy-operating interface, it can be mastered even by laypeople.
2 中英文界面自動切換,并具有第三方語言編輯功能It can automatically switch from Chinese to English interface, and has the ability to edit in the third-party language.
2 測試不同的樣品時,準直器可由軟件設置自動切換
It can automatically switch between collimators when testing different samples.
2 方便的報告輸出方式,可導入到EXCEL表格中;并有不可編輯立報告輸出格式Convenient output modes for the reports, which can be imported to EXCEL spreadsheet, together with the non-editable, independent output format.
2 儀器的校對方便、簡單 Easy and convenient to calibrate the instrument.
2 并可實時顯示測量結果,方便客戶縮短測量時間。
Real-time display of the testing results allows the customers to reduce the whole testing time.
2 并可對樣品進行粗略的材質判斷功能。
It’s able to make a primary judgment of the sample’s material.