自動壓鑄水口分離機、渣包自動分離機、剪水口機
東莞工廠鋅合金壓鑄周邊設備GS-C2 全自動水口分離機去水口機的機械參數與特性
一次性去水口、去披鋒、去合模線.
Mechanical parameters and characteristics of GS-C1 fully automatic water outlet separator, water outlet machine, and water outlet punching machine for zinc alloy die-casting peripheral equipment
型號Model No. GS-C2
適應壓鑄機噸位Applicable Die Casting Machine 38噸-168噸
電壓/電流/頻率 AC220V/2.3A/50HZ
功率Power 500W
氣壓源Air Pressure Source 5-6.5kgf/c㎡
安裝方式Installation Method 落地式Stand type
工件重量 Workpiece Weight 2-3kgs
機械重量Machine Weight 450KGS
外觀尺寸External Dimension 1000*870*2560mm
適應產品尺寸范圍Adapt to product size range 220*280mm
-全自動壓鑄壓鑄去水口機，屬于五金鋅合金壓鑄機生產的后續自動化加工去水口工藝設備，產品的機械特性如下：
-此壓鑄水口分離機、適應于出入料口材質比較硬、手工難以分離作業、平時用手動沖床分離的壓鑄坯件。
-利用沖模完成工作、省去調機時間。
-將產品與水口分離的同時、去除產品的披鋒與合模線、省去2段工序、更省人工成本、出貨快，效率更高。

適應范圍：五金鋅合金部件。
-The fully automatic die-casting and die-casting water outlet machine belongs to the subsequent automated processing water outlet process equipment produced by the hardware zinc alloy die-casting machine. The mechanical characteristics of the product are as follows:

-This die-casting nozzle separator is suitable for die-casting billets with relatively hard material at the inlet and outlet, which are difficult to separate manually, and are usually separated by manual punches.

-Utilize stamping dies to complete work and save machine adjustment time.

-At the same time as separating the product from the nozzle in one step, removing the edge and mold line of the product, saving 2 stages of processes, saving labor costs, fast shipment, and higher efficiency.

Scope of application: Hardware zinc alloy components.