人類生產活動造成的水體污染中，工業引起的水體污染嚴重。如工業廢水，它含污染物多，成分復雜，不僅在水中不易凈化，而且處理也比較困難。

工業廢水，是工業污染引起水體污染的重要的原因。它占工業排出的污染物的大部分。工業廢水所含的污染物因工廠種類不同而千差萬別，即使是同類工廠，生產過程不同，其所含污染物的質和量也不一樣。工業除了排出的廢水直接注入水體引起污染外，固體廢物和廢氣也會污染水體。

我公司主要產品：水處理設備，污水處理設備、廢水處理設備、工業污水設備、農業廢水設備、雨水凈水設備、醫院污水設備、鋼廠廢水設備、屠宰場廢水設備、食品廠廢水處理設備等多種設備，可根據要求定制水處理設備。

濟寧天通設備有限公司是一家從事水處理設備生產、銷售集一體化的企業，始終堅持做出產品，本著“追求、員工、技術、精神、利益”10字宗旨?，F(xiàn)擁有一批精干的管理人員和一支高素質的技術隊伍，舒適優雅的辦公環境和擁有全新現代化的標準廠房。我們以質量為生命、時間為信譽、價格為競爭力的經營信念，立足與濟寧地區

貴陽某造紙廢水處理工程

工程名稱：貴陽地區造紙廢水處理工程

工程性質：造紙廢水處理工程

工程范圍：污水處理站1米內的所有內容，包括設備的供貨、指導調試。

二 排放標準：

該設備處理后水質標準如下表所示《污水綜合排放標準》GB8978-2002排放標準執行：

三要求：

（1）       處理工藝技術，系統運行經濟安全可靠。

（2）       處理設施、節能，管理、運行、維修方便且能長久正常運行。

（3）       構筑物及設備布局要緊湊合理，占地面積小且美觀大方。

（4）       乙方：所供設備和配套材料都是全新的、完整的和新設計的，達到質量標準和滿足安全使用要求

五 質量

1 賣方所提供設備是全新的、在交付時沒有材質或工藝上的缺陷且符合買方提出的技術標準及規范；

2 賣方應其出售的設備科提供正常和恰當?shù)厥褂?，并且在?jīng)過正確安裝、正常操作和保養的前提下，在設備的壽命期內運轉良好；

3 設備的材料和零部件均應符合或優于買方提出的技術標準及規范。

六 設備的安裝調試驗收

 1 設備交貨后，賣方應在買方通知現場具備安裝條件時，在一周或更短的時間內派技術人員到場安裝，并在規定時間內安裝調試完畢，同時賣方負責安裝調試過程中所有因質量缺陷而損壞的零部件免費更換。

2 設備在賣方指導下安裝調試運行后，買方和賣方共同對設備進行安裝調試驗收，若賣方不參與聯合檢驗，則視為同意買方的驗收結果。設備經安裝調試驗收合格后，由雙方共同簽署《設備安裝調試驗收結論單》。

3由賣方負責指導安裝，并負責指導調試，只有經過安裝調試并且技術性能達到合同技術中所述的技術要求后，買方才能接受全部貨物。

In the water pollution caused by human production activities, the water pollution caused by industry is the most serious. Such as industrial wastewater, it contains more pollutants and complex components, not only in water is not easy to purify, but also difficult to deal with.

Industrial waste water is the most important cause of water pollution caused by industrial pollution. It accounts for most of the pollutants discharged from industry. Industrial wastewater contains varied pollutants due to different plant types. Even in similar factories, the quality and quantity of pollutants contained are different from those of similar factories. In addition to the direct injection of waste water from the wastewater to cause pollution, solid waste and waste gas will also pollute the water body.

Our main products: water treatment equipment, sewage treatment equipment, sewage treatment equipment, industrial equipment, agricultural sewage water equipment, water purification equipment, water equipment, steel hospital sewage water equipment, slaughterhouse wastewater equipment, food factory wastewater treatment equipment and other equipment, can be customized according to the requirements of professional water treatment equipment.

Jining Tiantong Equipment Co., Ltd. is a company engaged in the integration and production of water treatment equipment. It always insists on making high-quality products, in line with the 10 purposes of "pursuit, employees, technology, spirit and interests". We have a group of competent managers and a high-quality professional and technical team, comfortable and elegant office environment and a new and modern standard factory. We are based on the quality of life, time as a credit, price competitive business belief, based on the Jining region

.

A paper waste water treatment project in Guiyang

Project Name: papermaking wastewater treatment project in Guiyang area

Engineering properties: Papermaking Wastewater Treatment Engineering

The scope of the project: the sewage treatment station within 1 meters of all content, including delivery, equipment debugging.

Two emission standards:

The water quality standard of the equipment is implemented as follows: the first level discharge standard of the "sewage comprehensive discharge standard" GB8978-2002, as shown in the following table:

project

CODCR/ (mg/L)

BOD5/ (mg/L)

SS/ (mg/L)

Influent amount

Water output

1500-2000

Less than or equal to 60

500-1000

Less than or equal to 10

200-450

Less than or equal to 10

Three the requirements:

(1) the processing technology is advanced and the system is safe and reliable.

(2) the treatment facilities are efficient and energy-saving, and the management, operation and maintenance are convenient and can run for a long time.

(3) the layout of the structures and equipment should be compact and reasonable, and the area is small and beautiful.

(4) Party B guarantees that the equipment and supporting materials are all new, complete and latest designed to meet the quality standards and meet the safety requirements.

Five quality assurance

1 the Seller guarantees that the equipment provided is completely new and has no material or technological defects at the time of delivery and is in conformity with the technical standards and specifications proposed by the buyer.

2, the Seller shall ensure that the equipment department which sells it provides normal and proper use, and performs well during the life of the equipment under the premise of proper installation, normal operation and maintenance.

3 the materials and parts of the equipment shall be in conformity with or superior to the technical standards and specifications proposed by the buyer.

Installation and acceptance check and acceptance of six equipment

1 equipment after delivery, the Seller shall notify the buyer in the field have the installation conditions, sent technical personnel to the scene to install in a week or a shorter period of time, and the installation is completed within the specified time, at the same time, the Seller shall be responsible for the installation process all the damage due to quality defects of parts replaced free of charge.

2, when the equipment is installed under the seller's guidance and commissioning, the buyer and seller jointly install, check and accept the equipment. If the seller does not participate in the joint inspection, it will be deemed to agree with the buyer's acceptance result. After the installation and commissioning of the equipment, the two parties jointly sign the "conclusion of the installation and commissioning of equipment".

3, the seller is responsible for guiding the installation, and is responsible for guiding the commissioning. Only after installation and commissioning and technical performance can meet the technical requirements described in the contract technology, can the buyer accept all the goods.