優缺點

優點包括拆裝快捷、移動方便、占地面積小、易于實施自動化、工作性能可靠、攪拌快速均勻等。然而，移動攪拌站也存在一些缺點，如生產能力受限、設備維護難度較大、生產過程會產生一定噪音和粉塵等。

以上是對移動式攪拌站的詳細介紹，包括其特點、結構構成、應用領域和優缺點等方面。

HZS050Y移動式混凝土攪拌站，配套JS1000混凝土攪拌機，采用皮帶機上料方式，理論生產率為50m3/h，可攪拌各種類型的混凝土，適用于中小型工程建設。
HZS050Y concrete batching plant, equipped with JS1000 twin shafts mixer and belt type aggregates charging system, has rated output 50m3/h compacted concrete. It can mix various kinds of concrete and is suitable for small and medium sized construction projects.
攪拌站采用模塊式設計，便于集裝箱運輸。攪拌站安裝后車橋，可用牽引車整體拖運轉移工地。
Modular design subserves container transportation. With rear axle installed, the concrete batching plant can be integrally towed by tractor.
整套設備的運行和計量采用微機控制，可實現生產過程的全自動控制、生產管理及報表打印。
The plant is fully automatic controlled by computer with production management and data printing software.

注：1. 產品按國家標準GB/T10171-2005及合同約定執行；
Note:1.Products are manufactured according to China state standard GB/T10171-2005.
2. .國家標準及合同中未約定部分按生產廠家產品參數執行；
2. All the parts which are not stipulated in the above or in the State standard are according to the manufacturer’s design.
3.由于技術改進原因，外購件型號、技術參數、產地可能有改變，但不低于現有功能
3 All the parts and specification may be changed without notification due to technical improvement , but not lower than the above configuration.
4、買方需自備以下設施：The buyer should provide the following facilities
（1）攪拌站的混凝土基礎、到攪拌站配電柜的電源及攪拌站水源；
（1）the foundation of concrete batching plant, the power and water supplying point according to our foundation drawing.
（2）到攪拌站內的避雷系統；
（2）Lightning protection system
（3）根據國家標準進行的重量校準測量及校準的費用；
（3）Scales calibration is carried out according local standard on buyer’s expenses.
1.本設備建議采用三相五線制配電電源,單根電源線采用線徑不小于95mm2 的銅線，電源變壓器容量不小于200kVA，變壓器距離攪拌樓不大于100米，否則需增粗線徑。
The plant is suggested to adopt three phases five wires power supply , the single power line diameter is not less than 95mm2 of copper cable, and the capability of the transformer is not less than 200kVA. The distance between transformer and concrete batching plant should be less than 100 meters, otherwise the cable diameter should be increased.
6、以上配置按中國國內電源參數（電壓380V/220V，頻率50Hz）設置，如電源參數與此不符，需提前告知我公司。
The power source for all electrical components and motors is 380 V / 220 V, 50 Hz, If power source is different, please inform our company in advance.