路面標線怎么來的呢?是熱熔釜和熱熔劃線機共同搭檔，劃出來的!下面跟大家分享的是

熱熔釜這款設備，一起進來看看吧!

Where do road markings come from? Is a hot-melt cauldron and hot-melt 

marking machine common partner, marking out! The following is to share with 

you hot cauldron this device, come in and have a look!

熱熔釜的特點是啥呢？

1.2噸熱熔釜燃燒，15馬力柴油機，電啟動，連續施工

1.2噸熱熔釜運轉，設備性能穩定，功能，連續工作時間長

1.2噸熱熔釜正反向攪拌，無級變速，操作簡單，攪拌均勻

What is the characteristic of hot cauldron? 1.2 ton autoclave combustion 

efficiency is high, 15 horsepower diesel engine, electric start, continuous 

construction 1.2 tons autoclave high performance operation, equipment 

performance is stable, function is outstanding, continuous working time is 

long 1.2 tons autoclave forward and backward stirring, stepless speed 

change, the operation is simple, and the mixing is even

熱熔釜的參數：

動力：電啟動水冷柴油機

功率：15馬力

缸體容量：1200KG（600*2）

液壓油箱容積：40L

重量：900KG

尺寸：1900*1680*1635mm

熱熔釜的功能

熱熔釜和熱熔劃線機配套使用，是熱熔標線施工的關鍵設備之一，標線施工時，先用熱

熔釜將粉末狀涂料加熱，攪拌，直到熱熔變成液態后，再將涂料放入熱熔劃線機內進行

劃線施工。

The function of hot-melt Cauldron and hot-melt marking machine are used 

together, which is one of the key equipment for hot-melt marking 

construction. During marking construction, the powder coating is heated and 

stirred with hot-melt cauldron until the hot-melt becomes liquid state, the 

coating is then put into the hot melt scribing machine for scribing 

construction.

熱熔釜的性能

不銹鋼缸體，高碳鋼鍋底，直立槳片式攪拌機?

框架結構，釜體內膽與外壁間裝有保溫材料 

加熱系統為石油液化氣，直噴式爐頭燃燒器

柴油機代用液壓攪拌系統，自動攪拌

配置十個火路，缸體一邊五個

Performance of stainless steel cylinder, high carbon steel bottom, vertical 

blade agitator? The heating system is liquefied petroleum gas (LPG) . The 

direct injection burner diesel engine is an alternative hydraulic stirring 

system. There are ten fire paths and five on each side of the cylinder

天德立生產的12噸熱熔釜是常用的一款熱熔釜設備，其配置高，熱熔效果好，節能環保

，歡迎購買！