3、屬非離子表面活性劑，溶解力強，實驗室稱溶蠟劑一般是指異構醇油酸皂DF-20。
4、溶液的除蠟效能與速度，遠遠優于同類三乙醇胺油酸皂、 6503、維護成本低味道輕！在生產研磨劑；防銹劑等產品中大量使用。

因此對重油污或者拋光蠟、蠟污漬等有的清洗效果，在與傳統醇酰胺等脂肪醇酰胺相更顯經濟性.低VOC、低水體環境破壞、不含磷、不產生破壞離子等 日化級標準

Isomeric alcohol amide 6508 isomeric alcohol amide 6508 is easy to dissolve in water, excellent permeability, emulsifying (strong Hydrophilic Group) and thickening, and has a good dispersion effect on carbon black, soot and other particles in oil and fat! Therefore, it has excellent cleaning effect on heavy oil stain, polishing wax, wax stain, etc.

Parameters: Appearance: light yellow/yellow transparent viscous liquid (20 °C) Ph: (1% aqueous solution)8-9.5 active matter content (%)99 ± 0.5 value: 13.5 cloud point (high) : 100 °C foam grade: medium packing and storage: 1,200 kg plastic or iron drums 2, storage and transportation as general chemicals. Store in a dry and ventilated place. Store in a sealed place for 12 months

612/5000
Isomeric alcohol amide 6508 isomeric alcohol amide 6508 is easy to dissolve in water, excellent permeability, emulsifying (strong hydrophilic group) and thickening, and has a good dispersion effect on carbon black, soot and other particles in oil and fat! Therefore, it has excellent cleaning effect on heavy oil stain, polishing wax, wax stain, etc. . Recommended advantages: LOW VOC, low water environmental damage, no phosphorus, do not produce damaging ions, etc. , daily Chemical Grade Standard Parameter Index: Appearance: Pale yellow/yellow transparent viscous liquid (20 °C) Ph: (1% aqueous solution)8-9.5 active matter content (%)99 ± 0.5 hlb value: 13.5 cloud point (high) : 100 °C foam grade: medium packing and storage: 1,200 kg plastic or iron drums 2, storage and transportation by General Chemicals. Store in a dry and ventilated place. Store in a sealed place for 12 MONTHS

Please note that careful reading of the product will likely be applied to any occasion, the customer must pass a comprehensive test, self-determination of your specific application appropriate process. The formula conditions provided are for reference only. The increase and decrease of raw materials and usage amount are adjusted according to the required quality. The information provided by the company is based on the company's existing technical knowledge and experience, due to many factors in the process of processing and application of products, it is necessary and feasible for users to test by themselves